手順 10を翻訳中
手順10
LOCA glue
-
Apply LOCA glue like this. See a few Youtube videos on how to do it.
-
Make a tape handle onto the screen (picture) and route the digitizer first through its hole at the top.
-
Slowly lower the glass onto the LCD. Any bubbles and you will have to remove the glass and start from step 8 over again. Trust me, the bubbles look horrible.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。