手順 3を翻訳中
手順3
Separate the camera from the glue patch
-
Place your plastic opening tool underneath the bottom of the camera and rotate the tool to lift the camera. This will take a slight amount of force.
-
You will start to see the silver sticky patch between the camera and the mother board - leave this on the mother board.
-
Keep separating the camera from the sticky patch until completely removed.
-
To replace camera, use the yellow lines on the motherboard as your guide.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。