手順 1を翻訳中
手順1
Remove the ribbon cable for the floppy disk drive
-
If you have a floppy disk drive, it has a ribbon cable that runs over the heat-sink assembly that must be moved out of the way. To remove it, first unplug it from the system board by pulling on plastic pull ring.
-
The ribbon cable is fastened to the heat-sink assembly with four clips. Simply slide the ribbon cable out from under these clips and move the cable out of the way.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。