メインコンテンツにスキップ

iPod Touch 第5世代のフロントカメラの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての16個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
iPod Touch 5th Generation Front Camera Replacement: 手順 0、 2の画像 1 iPod Touch 5th Generation Front Camera Replacement: 手順 0、 2の画像 2
  • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

  • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

スパッジャーの平面側先端を使って、ディスプレイアセンブリ上のソケットから正面カメラをさっとめくります。

カメラモジュールをソケットに固定している接着剤が少量あります。しかしこれを剥がすには、それほど大きな力は必要ありません。 スパッジャーを使って、カメラモジュールの黒いプラスチックとカメラソケットの黒いプラスチックの間に挟み、それらを乖離します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります