手順 6を翻訳中
手順6
-
Remove the gears from both sides.
-
If the gears are hard to remove, use a flathead screwdriver to help remove them. The gears also may be greasy so place them on a paper towel or newspaper.
-
Remove the screws from the gearbox side plate with Phillips screwdriver to get to the gears. The screws are 7 mm in length and the head diameter is 3 mm.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。