手順 16を翻訳中
手順16
-
To reassemble the hop-up unit and barrel, first slide the hop-up bucking onto the barrel, making sure to slide the line in the bucking into the groove in the barrel.
-
Then slide the barrel and bucking into the hop-up unit with the groove in the barrel facing down, and install the green clip.
-
Finally, slide the brass ring around the barrel and into the front of the hop-up unit.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。