手順5に変更
- Parvathy Nambidiによって編集
承認済みの編集 : Parvathy Nambidi
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Move the ribbon cable aside. |
|---|---|
| - | [* red] Use the flat end of an iFixit Spudger to disconnect the battery cable from its socket in the logic board. |
| - | [* green] Locate the battery and the three 4.00mm Phillips screws that hold it in place. |
| - | [* black] Unscrew and remove the three screws. |
| + | [* red] Move the ribbon cable aside. Use the flat end of an iFixit Spudger to disconnect the battery cable from its socket in the logic board. |
| + | [* green] Locate the battery and the three 4.00mm Phillips screws that hold it in place. Unscrew and remove the three screws. |
| [* black] Lift the battery up and remove. | |
| [* icon_caution] Removing the battery can dislodge the touchpad bracket. Be cautious to place it over the alignment pins. |