手順1に変更
- Frank Buccellaによって編集
承認済みの編集 : Taylor Dixon
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Remove the three 70mm torx-6 |
|---|---|
| - | [* orange] Remove the two 70mm torx-6 |
| - | [* yellow] Remove the one 70mm torx-6 |
| + | [* red] Remove the three 70mm torx-6 screws from the center of the bottom motherboard. |
| + | [* orange] Remove the two 70mm torx-6 screws next to the rumble motors on the bottom motherboard. |
| + | [* yellow] Remove the one 70mm torx-6 screw located on the left side of the bottom motherboard. |