手順4に変更
- Jordan Byrnesによって編集
承認済みの編集 : Jordan Byrnes
- 前
- 後
- 変更なし
手順ライン
| [* black] On the left side of the handlebar, wrap the tape around the end in a counter-clockwise direction moving inward. | |
| + | [* icon_reminder] Wrap tight, but don't rip! |
| [* black] Using the scissors, cut the tape at an angle towards the outside of the bar. | |
| [* black] Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape (pictured). |