手順12に変更
- Chris Neateによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] You pulled that wire off the copper plate, didn't you? I sure did. Twice. If you have a soldering iron it's easy to strip the wire back, reheat the solder, and attach the wire to it. Even with no experience it's an easy job. | |
| - | [* black] If you don't have a soldering iron this might be a problem. It's not entirely necessary for the flash to work (I put it back together and fired off a couple shots without it). Nikon calls it the insulating plate but I'm not sure what it's for. |
| + | [* black] If you don't have a soldering iron this might be a problem. It's not entirely necessary for the flash to work (I put it back together and fired off a couple shots without it) but I wouldn't recommend it. Nikon calls it the insulating plate but I'm not sure what it's for. |