手順5に変更
- Dominik Schnabelrauchによって編集
承認済みの編集 : Dominik Schnabelrauch
- 前
- 後
- 変更なし
手順ライン
| [title] Saddle montage | |
| [* black] Loosen all screws of the hangers along the frame which hold the saddle cable. | |
| [* black] Bring the front end with the switch to the bar by pulling it through the hangers along the frame. Take care of the other cables around your bar. | |
| - | [* black] Position the |
| + | [* black] Position the lever on the right side of your bar and tighten it's screw loosely. Afterwards bring it into a comfortable position for your riding stance and tighten its bolt with the torque wrench to 5-6 Nm. |