手順3に変更
- Dominik Schnabelrauchによって編集
承認済みの編集 : Dominik Schnabelrauch
- 前
- 後
- 変更なし
手順ライン
| - | [title] |
|---|---|
| + | [title] Bar montage |
| [* black] Go on with positioning the handlebar centered in the stem clamp and put the faceplate back on. | |
| [* black] Retighten the bolts of the faceplate while the bar is in a adequate position with slightly pointing down brake levers, until they hold the bar. | |
| [* black] Now tighten the bolts in a cross pattern, starting with upper left going to lower right, then upper right going to lower left. The torque wrench value for this should be around ***8 Nm***. | |
| [* icon_caution] Make sure the upper and lower gaps between faceplate and stem body are parallel and with an identical width. |