手順11に変更
- Milena Haigesによって編集
承認済みの編集 : Milena Haiges
- 前
- 後
- 変更なし
手順ライン
| [* red] The LCD panel is held in place with eight 11.8mm T8 Torx screws. | |
| [* icon_note] The LCD in this iMac is not LED backlit, but uses the more traditional CCFL backlight. | |
| [* black] There are five cables (four inverter cables and one temperature sensor) to disconnect before the LCD panel can be removed from the iMac. | |
| - | [* black] This display is an |
| + | [* black] This display is an AU Optronics M302EW02. The manufacture date shown on the back of the LCD is 09/04, that's probably the 4th week of 2009. |