この手順に変更
- Kelsea Weberによって編集
承認済みの編集 : Kelsea Weber
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Try open edges around rear cover (do not completely remove cover). Warm rear side of phone with applied heat source, this will allow adhesives on the cover to soften. Once adhesives are soft enough, peal cover apart from phone. |
|---|---|
| + | [* black] Use a heat gun or iOpener to soften the adhesive holding the front and back case in place. |
| + | [* black] Use a plastic opening tool to pry the front and back case apart. |