手順1に変更
- Tobias Isakeitによって編集
承認済みの編集 : Tobias Isakeit
- 前
- 後
- 変更なし
手順ライン
| - | [* black] You should now see the |
|---|---|
| + | [* black] You should now see the EMI filter right in the middle of the device (although held in by a few other components). |
| [* black] Follow the wires coming out of the bottom of the Power adapter off to the left. | |
| [* black] Take the tweezers and remove the piece of tape holding the wires to the casing. | |
| [* black] There is only one connector that needs to be taken out (even though there are two right next to each other!). | |
| [* black] Grab the connector from the bottom and pull it carefully from its corresponding socket. |