手順5に変更
- Tobias Isakeitによって編集
承認済みの編集 : Tobias Isakeit
- 前
- 後
- 変更なし
手順ライン
| - | [* black] For the next connector, which is right next to the previous wire, there is a piece of tape that is sealing it to the board. Remove this first. |
|---|---|
| + | [* black] For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar. |
| + | [* black] Flip the metal bar over using the tape as a handle. |
| [* black] Next, grab onto the connector and slowly pull it from the socket in the logic board. |