手順6に変更
- Andrew Yoderによって編集
承認済みの編集 : Andrew Yoder
- 前
- 後
- 変更なし
手順ライン
| - | [* icon_ |
|---|---|
| + | [* icon_note] [product|IF145-082|Helping hands] may be helpful when soldering. If you have never soldered before, check out this [guide|750|soldering technique guide]. |
| [* red] Slide the red wire through the hole of the terminal that corresponds to the right speaker. Wrap the wire around the terminal a few times, then solder it in place. | |
| - | [* green] Repeat this step for the terminal that corresponds to the left speaker. |
| - | [* icon_note] The left wire is often white or green. |
| + | [* green] Repeat this step for the terminal that corresponds to the left speaker. Note that the left audio wire is often white or green. |
| [* orange] Finally, solder the common/ground cable (often copper colored) through the remaining hole. |