手順3に変更
- Julien Daigleによって編集
承認済みの編集 : Julien Daigle
- 前
- 後
- 変更なし
手順ライン
| + | [* red] Remove the data ribbon for the motherboard which is located on the right side of the board. It has a flat top on the connector. Remove it by using a spudger to pry it straight up. |
|---|---|
| + | [* orange] Locate the volume and power button connector on the left side of the mother board. Disconnect the ZIF connector by flipping the latch on the connector up and sliding the data cable directly out. |
画像1
以前の画像はありません
追加