Asus Eee PC 1005HA Bluetooth Module Replacement手順の4履歴

-	[* black] Flip the laptop back over, and open it.
-	[* red] ~~Remove~~ the ~~6 screws (~~5.5 mm) on inside covering.
-	[* black] Disconnect the touch pad ribbon cable. It is visible through a window at the bottom edge of the metal ~~part of the top casing and approximately 1/4 from the left edge~~.
-	[* icon_note] ~~In these photos the~~ connector shows blue.
+	[* black] Flip the laptop back over, and open the display.
+	[* red] Use a Phillips #1 screwdriver to remove the six 5.5 mm screws on the inside covering.
+	[* black] Disconnect the touch pad ribbon cable. It is visible through a window located 3 inches from the bottom left edge of the metal covering.
+	[* icon_note] The connector shows blue.