手順1に変更
- Dylan Perryによって編集
- 前
- 後
- 変更なし
手順ライン
| + | [* black] First the back panels must be removed from the monitor. |
|---|---|
| + | [* black] First remove the three 2mm hex screws from the top of the monitors stand. |
| + | [* black] Then, locate and remove the four 2mm hex screws on the corners of the back panel and remove them with the 2mm hex screwdriver. |
| + | [* black] Finally, the back panels can be removed by pulling the main cable through the opening and sliding the panels away. |
画像1
以前の画像はありません
追加