手順8に変更
- Caleb Karlsonによって編集
承認済みの編集 : Caleb Karlson
- 前
- 後
- 変更なし
手順ライン
| [* black] Now that you have the plastic frame removed, you have free access to the remaining hinge screws. Same with the previous step, tighten them if they need tightening, unscrew them ''slightly'' if they are too tight. | |
| - | [* |
| + | [* icon_note] ''***Optional: ***''Examine the area for broken plastic pieces. Although this isn't necessary for the repair, it's possible that while it was in use, plastic clips may have broken off, or (if you weren't careful), they might have broken off while you were doing the repair. Either way, remove any visible loose pieces. |
| [* black] Carefully test the display assembly by opening and closing the screen. Hopefully, you have now fixed the issue and you won't have any problems for the foreseeable future. | |
| [* black] Push the frame back into place with your hands, and slide your finger along the edge to make sure the clips have clipped into place. |