手順7に変更
- Caleb Karlsonによって編集
承認済みの編集 : Caleb Karlson
- 前
- 後
- 変更なし
手順ライン
| - | [* |
|---|---|
| + | [* icon_caution] ***Caution: ***This is one of the most delicate parts of the whole guide. Be patient and gentle, you ***''do not''*** want to risk breaking the frame or the clips. In my experience, you may have to re-slide the spudger across an already finished side in case it reclipped back into place. |
| [* black] The frame on the computer is held in by both clips and glue, which means it's slightly more difficult to remove. Slide your spudger along the edges of the frame, starting with the left or right side. | |
| [* black] You should hear each side unclip as you slide your spudger across. After you have the sides done, slide it along the top and then finally the bottom. | |
| [* black] Once you think you have everything unclipped, slide your spudger across each side another time just to be safe. It doesn't take much force for the clips on a side to re-attach, so you want to make sure that they are actually unclipped before removing the frame. |