手順13に変更
手順ライン
| [title] Unclip outer metal frame | |
| [* black] Note when outer metal frame is off, LCD will fall out if assembly is turned over so be very careful. | |
| [* black] Peel back 2 black lifting tabs | |
| + | [* black] Peel off the black tape on all 4 corners. |
| [* black] For first timer, probably best to sit LCD assembly on top of a box so the buffer boards and cover can dangle free while inserting a pry tool along the perimeter to unclip the outer metal frame. Box allows easy LCD rotation while working to unclip the 3 sides (2 sides and lifting tab side) |