手順9に変更
手順ライン
| + | [title] Remove T-Con, Unstick Buffer Board |
|---|---|
| + | [* black] Rotate up T-Con (pivot on flex cable side) and release it from sticky tape. Likely difficult first time to release the tape. |
| + | [* black] Unlatch t-con to buffer board flex on buffer board side. Wiggle t-con board gently to release flex from connector (likely difficult on first release) |
| + | [* black] Flip up buffer board to release from sticky tape. Difficult first time to release the tape. Be gentle to avoid damaging the gold foil flex bonded between buffer board and LCD. Unrepairable without pro equipment if this foil flex bond is broken |
| + | [* black] After flipping up the buffer board. Gently put it back down to keep it secured against the double sided tape to get ready to remove the outer metal frame. We are releasing the buffer board first time here as later on will not have good orientation to the difficult first time release. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加