Apple Thunderbolt Display Black Blanking Out Repair手順の7履歴

	[title] Peel Tape and Unscrew T-Con Buffer Board Cover
	[* black] Peel off black tape surrounding the cover. Careful around the 3 connector regions (notes below) Peel off foil tape at the 2 ends of cover. Remove 4x phillips screws.
-	[* black] LCD connector is very difficult. Its a flip latch connector with a handle tape just like the other end of cable. ~~Depending on assembly,~~ ~~connector may be taped down~~ with ~~multiple~~ layers of ~~tape~~. ~~Handle tape can be sandwiched between 2 sticky surfaces of tapes.~~ careful not to rip the LCD connector off the t-con board. Often need to cut handle tape.
+	[* black] LCD connector is very difficult. Its a flip latch connector with a handle tape just like the other end of cable. The handle tape is stuck together with the cover tape in 3 layers of sticky pages. Be careful not to rip the LCD connector off the t-con board. Often need to cut handle tape. See more pic in next step for details