手順2に変更
- Nick Schultzによって編集
承認済みの編集 : Nick Schultz
- 前
- 後
- 変更なし
手順ライン
| + | [title] Disconnect "OCTA" connector |
|---|---|
| [* icon_note] The ribbon cable is not connected directly to the board, but to another ribbon cable. Make sure you disconnect the ribbon cables from each other. | |
| [* black] Insert the flat end of a spudger underneath the overhang of the top ribbon cable connector. | |
| [* black] Gently pry the top connector straight up and away from the bottom one until it is free. |