手順5に変更
- Spencer Dayによって編集
承認済みの編集 : Spencer Day
- 前
- 後
- 変更なし
手順ライン
| [* icon_caution] The logic board is delicate. Be careful not to bend it as you free the lower edge from the frame. | |
| + | [* icon_note] Before trying to remove the board, make sure you removed the SIM tray. |
| [* black] Lift the top edge of the logic board from the frame. | |
| [* black] Pull the top edge of the logic board to the right of the frame so the cutouts of the board [link|https://guide-images.cdn.ifixit.com/igi/qeJGCmlSoOHH3WVX.full|lift over the vibration motor|new_window=true] and protrusions in the frame. | |
| [* black] As you pull, guide the charging port out of its recess in the frame. | |
| [* icon_caution] Don't fully remove the logic board yet, as it's still connected to the frame by the screen cable. | |
| [* icon_reminder] During reassembly, push the logic board toward the bottom of the frame and ''press the charging port down'' until the bottom edge sits flush with its [link|https://guide-images.cdn.ifixit.com/igi/C5mh2GQxtOUthDGK.full|protrusion in the frame|new_window=true]. | |
| [* icon_note] Make sure the flash, front-facing camera, and press connector don't become trapped under the frame. |