MSI MS-1782 Back Cover Replacement手順の1履歴

-	[* red] ~~Use a Philips JSI #1 bit to remove~~ the bottom cover ~~screws~~. ~~Five outer 6.6mm.~~
-	[* orange] ~~The middle~~ screw is a ~~different size so make sure to separate this one~~. ~~This screw is 5.6mm in size but uses the same bit size.~~
+	[* red] Remove five 6.6 mm screws from the edges of the bottom cover using a JIS #1 screwdriver.
+	[* orange] Remove one 5.6 mm screw from the center of the bottom cover using a JIS #1 screwdriver.