手順14に変更
- Clay Eickemeyerによって編集
承認済みの編集 : Clay Eickemeyer
- 前
- 後
- 変更なし
手順ライン
| [title] Slice the top edge adhesive | |
| [* black] Insert a third opening pick next to the one in the top left corner. | |
| [* icon_caution] Don't insert your pick deeper than 7 mm. | |
| - | [* black] Slide your pick toward the middle of the screen until you reach the sensor bracket, 69 mm (2.7 in) from the left edge. |
| + | [* black] Slide your pick toward the middle of the screen to separate the adhesive until you reach the sensor bracket, 69 mm (2.7 in) from the left edge. |
| [* icon_note] You'll feel the bracket with your pick. If you try to slide farther, it'll push your pick out to a depth of 2 mm. |