手順1に変更
- Nickolas Delgadoによって編集
承認済みの編集 : Nickolas Delgado
- 前
- 後
- 変更なし
手順ライン
| [title] Remove Bottom Cover | |
| - | [* black] Loosen the 9 screws from the bottom cover with the Phillips #1 screwdriver. NOTE: You don't need to remove the screws. They will remain attached to the cover. |
| - | [* black] Once all of the screws are loose, use opening |
| + | [* black] Loosen the 9 screws from the bottom cover with the Phillips #1 screwdriver. NOTE: You don't need to fully remove the screws. They will remain attached to the cover. |
| + | [* black] Once all of the screws are loose, use the opening tool to pry the cover from the frame. NOTE: I like to start near the hinges as shown in the pictures. There is a gap that allows for enough leverage to open the cover. |
| [* black] IMPORTANT: If you feel resistance when lifting the cover, loosen the screws again. The plastic if very fragile and will break if too much force is applied when removing the cover. |