手順7に変更
- Sarah Westbergによって編集
承認済みの編集 : Sarah Westberg
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Place the dust cover sliding it through the top and proceed to install the stem. (Check how much space is there in between the top of the steerer tube and the top of your stem, your steerer tube should lay just a few millimeters below allowing clamping and compression, If not, add a spacer on top of the dust cover under the stem. |
|---|---|
| + | [* black] Slide the dust cover on and install the stem. |
| + | [* icon_note] Check the amount of space there is between the top of the steerer tube and the top of your stem. Your steerer tube should lay just a few millimeters below allowing for clamping and compression. If it doesn't, add a spacer on top of the dust cover and under the stem. |