この手順に変更
- Joseph Remondiによって編集
承認済みの編集 : Joseph Remondi
- 前
- 後
- 変更なし
手順ライン
| [* black] The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop. | |
| + | [* black] Remove 11 T5 Torx screws from the underside of the laptop |
| + | [* black] Wedge the case apart with a plastic spudger. If the plastic one isn't possible to insert, use the metal spudger to carefully create a small gap first. |