メインコンテンツにスキップ

手順3に変更

- Connorによって編集

承認済みの編集 : Connor

変更なし

手順ライン

-[* red] Lift the locking bars on the five ZIF connectors, then pull the ribbon cables directly out of their ports.
+[* red] Use a spudger to flip up the locking bars on the five ZIF connectors, then pull the ribbon cables directly out of their ports.
[* orange] Use a Phillips #0 screwdriver to remove the four 2.2 mm screws along the top of the touchpad.
[* icon_note] One 2.2 mm screw is hidden under the cables at the top right corner of the touchpad.
[* black] Lift the trackpad up and out.