手順5に変更
手順ライン
| + | [title] Measurement |
|---|---|
| + | [* black] Disconnect the Main flex cable and connect the charger. |
| + | [* black] Use Multimeter to measure the voltages at the the large end pins of the FPC connector of the Charging board - pic.2 |
| + | [* black] If the reading is okay (~5V) continue with the next step, if not - change the Charging board. |
| + | [* black] Attach the Main flex cable and measure the large end pins of the Main flex FPC connector - pic.3. |
| + | [* black] If the reading is okay, continue with the next step, if not - change the Main flex cable. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加