手順11に変更
- Bango Bejlaによって編集
承認済みの編集 : Bango Bejla
- 前
- 後
- 変更なし
手順ライン
| [* black] Remove the two (identical) lower screws with the 3mm hex key | |
| [* icon_note] On this bike type, the frame could take bigger screws, thats why the first screw has a longer "neck". In one case this came out directly, when unscrewing the screw. | |
| [* icon_reminder] If this extra does not come out, then it can be removed with a big flat head screwdriver (size 8) later on, but must not necessary be removed | |
| + | [* icon_note] These screws are 17,5 mm long |
| [* black] Lift off the plastic cover |