手順9に変更
- Bango Bejlaによって編集
承認済みの編集 : Bango Bejla
- 前
- 後
- 変更なし
手順ライン
| [* black] Proceed using a T25 torx screwdriver to remove the 2 screws holding the plastic cover in place on the right side of the frame | |
| - | [* icon_reminder] approximately |
| + | [* icon_reminder] approximately where earlier the belt placeholder was |
| [* black] After all these screws (4 in total on this side) are removed, the plastic cover can be lifted and removed | |
| [* black] Proceed to the other side |