手順23に変更
- Bango Bejlaによって編集
承認済みの編集 : Bango Bejla
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Remove the upper screw with a 3 mm hex key on both sides. (2x in total) |
|---|---|
| - | [* icon_note] These screws are slightly longer and thinner, than the lowest screws |
| [* black] Remove the screw next to the battery charging port with a PH1 Screwdriver | |
| [* icon_note] This screw is the smallest of the three types | |
| [* black] Remove the lower screw on one side. | |
| [* icon_note] This lower screw is thicker and shorter, than the upper hex screw | |
| [* icon_note] The screw on the other side can also be removed, however, there must be a spacer inbetween! | |
| [* black] After all 4 (or 5) screws are removed, the black cover can be taken off (comes in two pieces) sideways |