手順4に変更
- Andrew Bookholtによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Use a heat gun to soften the adhesive under the black strip along the right side of the front glass panel. | |
| [* black] Attach a suction cup along the right side of the front glass panel. | |
| [* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly. | |
| [* black] Continue working along the right edge of the front display glass until it is separated from the display. | |
| - | [* icon_note] It |
| + | [* icon_note] It may be helpful to use a guitar pick or another thin plastic object to keep the upper right corner of the front glass panel from sticking back down to the display assembly. |