手順4に変更
- Kyle Smithによって編集
承認済みの編集 : Kyle Smith
- 前
- 後
- 変更なし
手順ライン
| [title] Cut along the perimeter of the rear cover | |
| + | [* icon_caution] While cutting through the adhesive, don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components. |
| [* black] Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover. | |
| [* icon_note] You can insert each new opening pick in the gaps created by the opening picks left in each corner. | |
| [* black] As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing. | |
| - | [* black] Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive |
| + | [* black] Slide an opening pick back and forth around the entire perimeter of the phone to release any missed adhesive. Reheat any stubborn adhesive. |