手順6に変更
手順ライン
| + | [title] Release Yoke and Spring Assembly |
|---|---|
| + | [* orange] Remove the top two 16mm J1 JIS head screws. |
| + | [* yellow] Remove the bottom two 14mm J1 JIS head screws. |
| + | [* black] Pull the white assembly away from the cover and push the joystick handle toward the cover from the other side so that the sensors are accessible and free of the ribs in the cover that hold them in place. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加