手順2に変更
- Dominik Schnabelrauchによって編集
承認済みの編集 : Dominik Schnabelrauch
- 前
- 後
- 変更なし
手順ライン
| + | [title] Insert an opening pick |
|---|---|
| [* black] Secure a suction handle to the right edge of the back cover, as close to the edge as possible. | |
| [* icon_note] If the phone's back cover is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. | |
| [* black] Lift the back cover with the suction handle to create a small gap between the glass and the frame. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_note] In case you have trouble creating a gap, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating. |