手順5に変更
- Adriana Zwinkによって編集
承認済みの編集 : Adriana Zwink
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Use the suction cup to get a gap for an opening pick. |
|---|---|
| - | [* black] Go up and down the side with your opening pick to loosen the adhesive. |
| + | [* black] Pull up on the suction cup with firm, constant pressure and insert an opening pick between the screen and rear case. |
| + | [* icon_note] This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer. |
| + | [* black] Slide the opening pick up and down the right side of the phone to separate the display adhesive. |