手順5に変更
手順ライン
| + | [title] charging |
|---|---|
| + | [* black] Connect the ventilator back to the AC power. |
| + | [* red] Make sure the battery is properly installed by verifying that the yellow ***Battery (charged) LED*** on the front panel flashes. The flashing LED indicates the battery is being charged. |
| + | [* icon_note] A new battery must be charged for at least 5 hours before being placed into service. |
| + | [* icon_note] The manufacturer recommends that the ventilator’s batteries be fully charged before ventilating a patient. If the batteries are not fully charged and AC power fails, always pay close attention to the level of battery charge. |
| + | [* icon_note] The ventilator charges the battery whenever the ventilator is connected to AC, with or without the ventilator switched on. The ***Battery (charged) LED*** flashes to show that the battery is being charged. |
画像1
以前の画像はありません
追加