手順2に変更
手順ライン
| + | [title] Open the enclosure |
|---|---|
| + | [* black] Take the flathead screwdriver. |
| + | [* red] Insert it into the slot located at the bottom of the handle and turn counterclockwise to release the bottom cap. |
| + | [* icon_caution] Be careful with this as the plastic is not very solid. Deforming the material could result in issues when placing the device onto the charging station. |
| + | [* black] Hold the handle upside down, and push down on the shaft to release the internal components of the handle. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加