手順7に変更
- Dominik Schnabelrauchによって編集
承認済みの編集 : Dominik Schnabelrauch
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Lift and remove the back cover. |
| + | [* black] Before installing fresh adhesive and reassembling, remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth. |
| + | [* icon_reminder] During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. |
| + | [* icon_reminder] Secure the new back cover with pre-cut adhesive or double-sided adhesive tape. [guide|126585|After installing the rear glass], apply pressure for several minutes to help the adhesive form a good bond, such as by placing it under a stack of heavy books. |