手順7に変更
- Victoria Yatesによって編集
承認済みの編集 : Victoria Yates
- 前
- 後
- 変更なし
手順ライン
| [* black] Thread the shift cable back into the derailleur, pull it tight and tighten the anchor bolt so the cable flattens. Then find a bare stretch of cable and give it a good pull to make sure the cable is seated and has no slack. Then loosen the cable, pull it tight again and re-tighten it. | |
| - | [* black] ***Adjust the derailleur limiting screws and cable tightness as needed. *** |