メインコンテンツにスキップ

手順5に変更

- Justin Ogiharaによって編集

承認済みの編集 : Justin Ogihara

変更なし

手順ライン

-[* red] Use a Phillips #1 screwdriver (PH1) to remove the two 3.4 mm screws on the sides.
-[* orange] Use a Phillips #0 screwdriver (PH0) to remove the one 3.3 mm screw at the bottom of the bracket.
+[* red] Use a Phillips #1 screwdriver to remove the two 3.4 mm screws on the sides.
+[* orange] Use a Phillips #0 screwdriver to remove the one 3.3 mm screw at the bottom of the bracket.