手順1に変更
- David Albarran-Martinezによって編集
承認済みの編集 : David Albarran-Martinez
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Remove the three Phillips 2. |
|---|---|
| - | [* icon_note] The screw on the back of the ultrasonic sensor is covered by |
| + | [* red] Remove the three Phillips 2.8mm screws with a JIS #000 screwdriver. |
| + | [* icon_note] The screw on the back of the ultrasonic sensor is covered by foam. |