手順10に変更
手順ライン
| [title] Removing the Old Capacitors | |
| [* black] The old capacitors are these rectangle shaped components shown here. | |
| [* black] The factory capacitors are glued down. Using a small pair of needle nose pliers, gently pull up on the capacitor to break it free. | |
| - | [* black] The capacitors are surface-mount, so |
| + | [* black] The capacitors are surface-mount, so simply melt the solder on each leg and pull it free. |
| [* black] Only replace ONE capacitor at a time. This minimizes the chances of you forgetting which ones went where. |