手順5に変更
手順ライン
| + | [title] Remove and replace batteries |
|---|---|
| + | [* black] De-solder the old batteries from the PCB using your preferred method. |
| + | [* black] I cut the batteries free from the tabs. Then used a solder sucker to get rid of the bulk of the solder. Finally I heated up the joint and used pliers to push the remaining tab clear. |
| + | [* black] Note the polarity marked on the PCB and install the replacement batteries. Make sure you cut the tabs down before folding them over to prevent any shorts. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加